Coupling Cutting Machine

In coupling production, the material first gets cut from material pipe, waiting for inner threading and other process.

This cutting system includes not just cutting machine but also feeder table. The cutting length can be set into program, machine pull the pipe certain length that same as setting length, into cutting position, start cutting. When this cutting gets completed, the system pull material pipe the same length and cutting, continuous working.
For cutting material pipe with diameter between 2-3/8' to 7', disc cutting method is adopted; cutting material pipe with diameter from 7' to 21', band saw cutting method is adopted.
Disc cutting machine system

The head and tail of the material are automatically separated from the sawed workpiece, eliminating the need for manual sorting. The equipment features an automatic counting function
The equipment is equipped with a centralized lubrication system for automatic, timed, and quantitative lubrication
The equipment features an automatic chip removal function and is equipped with a cleaning air gun, facilitating easy equipment cleaning
The equipment is equipped with an overload protection function during the sawing process, and it automatically alarms in case of abnormal sawing conditions.

Diameter range: ￠ 60-￠ 180 mm, wall thickness 5-50, length 100-300mm
Raw material length: 6000-12800mm.

The band saw cutting system used for big diameter steel pipe, the equipment consists of a saw frame part, a transmission part, a tensioning part, a base part, a saw frame lifting system, a bed part, a control part, a hydraulic system, a lubrication system, a cooling system, a chip removal system, a feeding platform, a feeding automation mechanism, a discharging platform, etc

Equipment safety protection device
Anti-collision device for the relative position between the movable clamp and the movable guide arm
Overload load protection device
The material is not clamped and the saw blade cannot start the device
Power off protection when opening the door.
The no-load noise is less than 80 decibels (measured at a distance of 1 meter from the sound source)
According to user's requirements and space available for machine system, the details are different from each other.
Contact information amanda@machine-steel.com